Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!seismo!brl-adm!brl-smoke!bogstad
From: bogstad@brl-smoke.ARPA (William Bogstad )
Newsgroups: net.lan
Subject: Re: Advice sought on VAX UNIX Ethernet/TCP-IP
Message-ID: <4904@brl-smoke.ARPA>
Date: Sat, 25-Oct-86 00:13:28 EST
Article-I.D.: brl-smok.4904
Posted: Sat Oct 25 00:13:28 1986
Date-Received: Mon, 27-Oct-86 01:02:58 EST
References: <223@rabbit1.UUCP> <452@brl-sem.ARPA>
Reply-To: bogstad@brl.arpa (William Bogstad (JHU|mike) <bogstad>)
Distribution: net
Organization: Ballistic Research Lab (BRL), APG, MD.
Lines: 20

In article <452@brl-sem.ARPA> ron@brl-sem.ARPA (Ron Natalie <ron>) writes:
>In article <223@rabbit1.UUCP>, barber@rabbit1.UUCP (Steve Barber) writes:
[deleted text]
>Others are
>
>DEUNA (DEC) - fine except you can't use it in the 750's main UNIBUS
>rack as it draws too much power.  It is also two HEX modules so it
>takes up a little more space.

	Are you sure about this?  It does eat alot of current but
a 11/750 can handle it.  (If you don't put too much else in there.)
I filled a 11/750 Unibus with a DEUNA, DZ/11, KMC11B, and Versatec
controller and according to my figures it was just under the rated
current.  Note: I think the current rating depends on whether you put a
DR11 in the Massbus.

	However, I still wouldn't reccomend it.

					Bill Bogstad
					bogstad@hopkins-eecs-bravo.arpa