Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!watmath!clyde!cbatt!ihnp4!drutx!druhi!des From: des@druhi.UUCP (SalyerDE) Newsgroups: net.micro.apple Subject: Re: card compatibility Message-ID: <1139@druhi.UUCP> Date: Tue, 14-Oct-86 13:39:26 EDT Article-I.D.: druhi.1139 Posted: Tue Oct 14 13:39:26 1986 Date-Received: Fri, 17-Oct-86 09:36:30 EDT References: <8610102302.AA09272@ucbvax.Berkeley.EDU> Organization: AT&T Information System Labs, Denver, Co Lines: 40 In article <8610102302.AA09272@ucbvax.Berkeley.EDU>, LMLARS01@ULKYVX.BITNET.UUCP writes: > > There has been a lot of speculation here about what cards will and won't > work in the GS. ....... > ... No card which uses phantom slotting will work in the GS. Well, the phantom'ed slots won't, but what about the regular slot - A card like the Versacard is set up to have the Serial 'card' in the 'real' slot that it is plugged into, perhaps this one function will work, at least until software upgrades to work with the //gs serial port come out? > Some old > coprocessor cards will fail because of the increased clock speed, but it > won't hurt anything to try one. But - you can change the processor speed! why not do that and see if the co-processor cards will then work! (at least it is possible). > These problems will soon be eliminated because newer and better versions > of programs like AE Pro and Softerm ][ are already making the rounds. Any word when these upgrades will be out (especially Softerm ][)? Also the cost! If Softerm ][ has the same upgrade policy as before, ($100 - half the cost of the original) I might look elsewhere. DISCLAIMER: I do not have an Apple //gs (yet!) and these guesses are just that - GUESSES! Does any-one have FACTS? This machine looks REAL good and I'm sure that the biggest expence for upgrade, will be trying to sell obsolete cards. Way to go APPLE! Real Life?: Dale Salyer (Programmer) E-Mail Address: ihnp4!druhi!des U.S. Mail: AT&T Info. Systems Laboratories Rm. 8Z326 Denver, CO 80229 (303) - 538-4907