Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!ll-xn!mit-eddie!genrad!decvax!mcnc!ecsvax!ranger
From: ranger@ecsvax.UUCP (Rick N. Fincher)
Newsgroups: net.micro.apple
Subject: Re: Using US ROBOTICS 2400 w/ Apple //e
Message-ID: <2159@ecsvax.UUCP>
Date: Wed, 22-Oct-86 10:57:42 EDT
Article-I.D.: ecsvax.2159
Posted: Wed Oct 22 10:57:42 1986
Date-Received: Thu, 23-Oct-86 18:54:10 EDT
References: <721@sphinx.UChicago.UUCP>
Distribution: net
Organization: UNC Educational Computing Service
Lines: 15

> If anyone uses a high speed modem of any brand, preferably the
> USRobotics, please lemme know what your configuration is including
> the software (which is most important.)
> 
> Include the pro's and con's of the system if applicable.
I use the USR Courier 2400 with a //e and Super Serial Card.  I have
had no Problems.  The only other 2400 baud system I have communicated
with was also running a Courier 2400, so I can't say how it works with
other brands at 2400 baud.  It works fine with everything at 1200, too.
Some 2400 don't communicate well or at all with some other brands so
it is best to try before you buy, iff possible.

Rick Fincher
ranger@ecsvax
>