Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!rutgers!nike!ucbcad!ucbvax!BROWNVM.BITNET!ST802414 From: ST802414@BROWNVM.BITNET (CHRISTOPHER CHUNG) Newsgroups: net.micro.apple Subject: softerm II and hard drives. Message-ID: <8610290112.AA05440@ucbvax.berkeley.edu> Date: Tue, 28-Oct-86 12:03:18 EST Article-I.D.: ucbvax.8610290112.AA05440 Posted: Tue Oct 28 12:03:18 1986 Date-Received: Wed, 29-Oct-86 00:12:20 EST Sender: daemon@ucbvax.BERKELEY.EDU Organization: The ARPA Internet Lines: 11 Does anyone know how to modify Softerm II to work on a hard drive? I called Softronics technical support and they said it couldn't be done because DOS 3.3 cannot be run on a hard drive. This sounds very funny to me. The problem I am having is that I cannot load any of the configurations once I get softerm to boot. Anything that has to access the hard drive gives an I/O error. Anyone know why this is happening or how it can be fixed? Are there any other programs that you have encountered that do the same thing. Chris Acknowledge-To: