Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!uwvax!puff!beilke
From: beilke@puff.wisc.edu (Matt Beilke)
Newsgroups: net.micro.apple
Subject: Re: IIGS Sound Output
Message-ID: <289@puff.wisc.edu>
Date: Fri, 31-Oct-86 20:06:48 EST
Article-I.D.: puff.289
Posted: Fri Oct 31 20:06:48 1986
Date-Received: Sun, 2-Nov-86 23:56:49 EST
References: <8610301956.AA09191@mitre.ARPA>
Organization: U of Wisconsin CS Dept
Lines: 27

In article <8610301956.AA09191@mitre.ARPA>, mcgurrin@MITRE.ARPA (Michael Mcgurrin) writes:
> I'm curious about the output power for the IIGS.  I've seen the port labeled
> headphone in some magazine diagrams, and I understand the BOSE speakers
> have a built-in amp and are designed for use with things like Walkmen.
> Does the output have enough power to drive a small speaker or will I have
> to run it through an amp first?  Thanks!

     As you have stated, the BOSE speakers do have a built-in amp (You do
not have to purchase these from Apple, you can get them directly from 
BOSE.  They are the Room Mate (tm) line ).  Since, these do have a built-in
amp I would tend to very strongly think that an amp would be required
for any speakers larger than a set of earphones.

    -Matt


===============================================================================
                                                        
 UUCP  --> ...!{ihnp4,topaz,seismo,harvard}!uwvax!puff!beilke /kirk!diskman
                                                       \uhura!scotty!diskman
							      \checkov!diskman
     //       ARPA  --> beilke@puff.wisc.edu 
    //        CSNET --> beilke%puff.wisc.edu@csnet-relay
\\ // AMIGA   UUCP  --> ...!{ihnp4,topaz,seismo,harvard}!uwvax!puff!beilke
 \//  RULES!  USPS  --> Matt Beilke, 451 Witte B, Madison, WI 53706, USA

===============================================================================