Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!mcvax!ukc!its63b!csan
From: csan@its63b.ed.ac.uk (Andie)
Newsgroups: net.micro.atari16
Subject: Windowing
Message-ID: <92@its63b.ed.ac.uk>
Date: Thu, 16-Oct-86 17:45:36 EDT
Article-I.D.: its63b.92
Posted: Thu Oct 16 17:45:36 1986
Date-Received: Fri, 17-Oct-86 23:49:58 EDT
Reply-To: csan@its63b.ed.ac.uk (Andie)
Organization: I.T. School, Univ. of Edinburgh, U.K.
Lines: 12
Keywords: vsf_interior

I wonder if anyone out there can help me .
I have written a program in M68000 that allows me to open and manipulate a 
window . Not very hard I must admit but there was one thing I found strange.
When I moved the window , the background where the window originally was 
changes to black instead of the usual grey . Then when I move the window up
to the top right , the whole screen goes black . Next , I move the window
down to the bottom left and the screen reverts to its normal status .
Sizing the window is fine in the Y direction but not in the X direction .
Its all very strange.
I would appreciate any light that could be cast on this .
Thanks in advance.....(?)
--Andie Ness