Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utcs!lsuc!jimomura
From: jimomura@lsuc.UUCP
Newsgroups: net.micro.atari16
Subject: Re: alite.prg problems
Message-ID: <1354@lsuc.UUCP>
Date: Mon, 27-Oct-86 22:01:56 EST
Article-I.D.: lsuc.1354
Posted: Mon Oct 27 22:01:56 1986
Date-Received: Tue, 28-Oct-86 03:47:41 EST
References: <8610151526.AA17642@trwrb.UUCP> <861016-043934-4496@Xerox> <1364@trwrb.UUCP> <1351@lsuc.UUCP> <1372@trwrb.UUCP>
Reply-To: jimomura@lsuc.UUCP (Jim Omura)
Distribution: net
Organization: Barrister & Solicitor, Toronto
Lines: 23
Summary: RAM Disk conflict

In article <1372@trwrb.UUCP> sansom@trwrb.UUCP (Richard Sansom) writes:
>
...

>Alite does not work on monochrome systems (I should have stated this
>fact when I posted the beast).  If you have a color system, then be sure
>to extract both 1alite.pic and 1alite.sng and store them on the same disk
>as alite.prg.
>
     Actually, the problem wasn't monochrome, but some kind of conflict
with the 512K RAM Disk I was using on my 1040ST.  It's definitely the
*presence* of the RAM disk since it makes no difference whether I run from
the floppy or the RAM Disk.  It doesn't work either way.  If I boot without
the RAM Disk, 'alite' works fine.
>

Cheers! -- Jim O.

-- 
James Omura, Barrister & Solicitor, Toronto
ihnp4!utzoo!lsuc!jimomura
Byte Information eXchange: jimomura
(416) 652-3880