Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbatt!ukma!ukecc!chaney
From: chaney@ukecc.UUCP (Dan Chaney)
Newsgroups: net.micro.atari8,net.micro.atari16,net.micro
Subject: Re: Atari At Work
Message-ID: <730@ukecc.UUCP>
Date: Mon, 3-Nov-86 22:44:28 EST
Article-I.D.: ukecc.730
Posted: Mon Nov  3 22:44:28 1986
Date-Received: Wed, 5-Nov-86 05:30:16 EST
References: <1157@tekigm2.UUCP>
Reply-To: chaney@ukecc.UUCP (Dan Chaney)
Organization: Presently At Large
Lines: 11
Xref: watmath net.micro.atari8:566 net.micro.atari16:2951 net.micro:15869

To Whom It May Inspire to Help-

     Some years back I read an article (possibly in COMPUTE!) regarding the 
use of a servo via the joystick ports.  The interesting part of the article was
the explanation, and subsequent programs, allowing the joystick port to be
accessed for *output* from BASIC.  If anyone has this article or relevant ones, I would be very appreciative.  The end goal is to run a UART-based switching
system for the Atari 800.

       | Void where prohibited by law |           Bitnet:  EXT698@UKCC

						Dan Chaney