Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!bellcore!petrus!scherzo!allegra!rayssd!rpa
From: rpa@rayssd.UUCP (Robin P. Alston)
Newsgroups: comp.sys.atari.st,net.micro.atari16,comp.sys.amiga,net.micro.amiga
Subject: Atari ST vs Amiga: Engineering software?
Message-ID: <369@rayssd.UUCP>
Date: Fri, 7-Nov-86 15:23:05 EST
Article-I.D.: rayssd.369
Posted: Fri Nov  7 15:23:05 1986
Date-Received: Sat, 8-Nov-86 07:26:53 EST
Sender: rpa@rayssd.UUCP (Robin P. Alston @ Raytheon Co., Portsmouth RI)
Distribution: net
Organization: Raytheon Co., Portsmouth RI
Lines: 29
Xref: watmath comp.sys.atari.st:3 net.micro.atari16:2988 comp.sys.amiga:4 net.micro.amiga:5772

I'm considering buying an amiga or 1040 st. I would first like to know some
peoples experiences with availablity of some engineering software for them.

I am particularly interested in:
		Schematic Capture (Wire & net lists, Bill of materials etc etc)
		Printed Circuit Layout (Multi layer ?)

	optionally:
		Logic simulation

Does anyone have comments/real experiences? I am also interested in just how
the two machines can expand memory and hard disk and how much (approx) do
these expansions cost.

Mail me please first. If interest shows in the answers I will summarise later.


Thanx in advance for any help.
		Robin.
-- 
Robin P Alston MSc. aka The REAL Atilla.
Snr Engr, Raytheon
MET-4-1-911
Metropolitan Corp. Centre,
Glen St.,
MARLBOROUGH
MA 01752

Tel: (617) 460-8225