Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbatt!cbdkc1!cbnap!gws
From: gws@cbnap.UUCP (Gary W. Sanders (N8EMR))
Newsgroups: net.micro.att
Subject: Re: Unix PC 7300 & answering machine
Message-ID: <178@cbnap.UUCP>
Date: Mon, 20-Oct-86 21:44:24 EDT
Article-I.D.: cbnap.178
Posted: Mon Oct 20 21:44:24 1986
Date-Received: Tue, 21-Oct-86 23:53:20 EDT
References: <1200009@fthood>
Reply-To: gws@cbnap.UUCP (Gary W. Sanders (N8EMR)
Organization: AT&T Bell Labs Columbus,Ohio
Lines: 24

In article <1200009@fthood> egray@fthood writes:
>
>Is there a way to get a telephone answering machine to work properly
>with a AT&T Unix PC 7300 connected to the same phone line?  
>
>Apparently, the Unix PC is soaking up the AC ring voltage...
>
>.......

I have no problems with my machines on a 7300. just put them in the 
correct order.

(line)----[ans mch]---[7300]---[second modem]===[terminal]

I have three item  thing hanging off of the line. They all in serial connection,
not parallel.. (that might cause problems).


-- 
================================================================================
Gary W. Sanders		ihnp4!cbnap!gws		AT&T Bell Labs (Columbus)
72277,1325 (cis)				N8EMR @ WB8WGA	(packet radio)
614-860-5965 (w)				614-457-4595 (h)
================================================================================