Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 GARFIELD 20/11/84; site garfield.UUCP Path: utzoo!utcsri!utai!garfield!jay From: jay@garfield.UUCP Newsgroups: net.micro.cpm Subject: IMP for the C-128 Message-ID: <2835@garfield.UUCP> Date: Mon, 20-Oct-86 14:44:03 EDT Article-I.D.: garfield.2835 Posted: Mon Oct 20 14:44:03 1986 Date-Received: Sat, 25-Oct-86 16:46:21 EDT Sender: perry@garfield.UUCP Reply-To: jay@garfield.UUCP (Jay Kumarasingam) Organization: Memorial U. of Nfld. C.S. Dept., St. John's Lines: 20 I just started using the IMP terminal program on the commodore 128. I set the term to be adm31 and everything works fine except...... i) whenever there is a reverse video line (like when you more filename), all I get is graphic characters. ii) within vi when I insert into a line, it seems to overwrite the line. escape after insert does seem to change matters. does not seem to work either. That is all I found so far. Am I using the most suited termcap entry? Has anyone else had the same problems and/or fixed them? Please post. Also if anyone has the description (with escape sequence codes) for the adm31, I would appreciate it if you would post it or mail it to me. Thank you. J.(Jay) Kumarasingam UUCP: {akgua,allegra,cbosgd,ihnp4,seismo,utcsri}!garfield!jay CDNNET: jay@garfield.mun.cdn -- The opinions expressed here shall be voided in the morning.