Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utcs!tj
From: tj@utcs.UUCP
Newsgroups: net.micro.pc
Subject: Re: Procomm 2.4 problems
Message-ID: <1986Oct20.103944.24357@utcs.uucp>
Date: Mon, 20-Oct-86 10:39:44 EDT
Article-I.D.: utcs.1986Oct20.103944.24357
Posted: Mon Oct 20 10:39:44 1986
Date-Received: Mon, 20-Oct-86 10:41:04 EDT
References: <513@zen.BERKELEY.EDU> <250@bsdpkh.UUCP>
Reply-To: tj@utcs.UUCP (tj)
Organization: University of Toronto Computing Services, general purpose UNIX
Lines: 12
Checksum: 05000



Well, I finally got a copy of PROCOMM 2.4.1.  I can make it lose characters
on the screen at baud rates from 1200 up with a little bit of keyboard activity
while characters are coming in. 2.3 would lose characters at 19.2K baud but
2.4.1 is much worse. Response is pretty good on a monochrome screen with
a VEGA card emulating a Hercules Mono graphics or MDA but on the same vega
card acting like a CGA the response goes through the floor. There is something
REALLY wrong with this version of PROCOMM. 
We were really counting on PROCOMM here for a project in the works and
even got authorized but it looks like 2.4.1 needs serious work.
tj