Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!dayton!sjm
From: sjm@dayton.UUCP (Steven J. McDowall)
Newsgroups: net.micro.pc
Subject: Procomm 2.4.1 bugs
Message-ID: <216@dayton.UUCP>
Date: Sun, 19-Oct-86 18:19:56 EDT
Article-I.D.: dayton.216
Posted: Sun Oct 19 18:19:56 1986
Date-Received: Tue, 21-Oct-86 21:40:58 EDT
Reply-To: sjm@dayton.UUCP (Steven J. McDowall)
Distribution: world
Organization: Dayton-Hudson Dept. Store Co.
Lines: 20


Having used Procomm 2.4.1 (tm) for a little while now, I still have
found these various bugs (same as 2.4 suprise!):

    1)  When in vt-100 mode, and in line-wrap (auto wrap) it still
        wraps at the 80'th character, even if the next character is
        a C/R or a L/F. It SHOULD wait for the 81'st character before
        it decides it needs to wrap.

    2)  When down loading using the Kermit protocol, it seems to ALWAYS
        convert N/L (ie. Line Feeds) into C/R L/F pairs. Even if you specify
        a binary file transfer. Needless to say, this wrecks havok. 
        No where (at least where I can see :-) do I specify this conversion
        to take place.

-- 
Steven J. McDowall	
Dayton-Hudson Dept. Store. Co.		UUCP: ihnp4!rosevax!dayton!sjm
700 on the Mall				ATT:  1 612 375 2816
Mpls, Mn. 55408