Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!caip!rutgers!im4u!milano!tsmith
From: tsmith@milano.UUCP
Newsgroups: net.micro,net.micro.pc
Subject: SCSI, Hard disk
Message-ID: <2617@milano.UUCP>
Date: Tue, 21-Oct-86 15:26:41 EDT
Article-I.D.: milano.2617
Posted: Tue Oct 21 15:26:41 1986
Date-Received: Wed, 22-Oct-86 06:13:20 EDT
Sender: tsmith@milano.UUCP
Organization: MCC, Austin, TX
Lines: 15
Keywords: Interfaceing
Xref: watmath net.micro:15808 net.micro.pc:10616

Gentle net-people
HELP!  I have got two 30MB hard disks(with some sort of controller)
and a SCSI interface card which hooks up to them.  My question is how
do I use them on my vanilla (2 - floppy, MS-DOS 2.1) Sperry PC (close
clone).  Is there a special SCSI device driver?  Ideally, I'd like to
be able to boot from the harddisks - but would settle for using them
as storage.  ANy advice and/or educational information on SCSI would
be greatly appreciated.  Pleeze E-Mail replies.
Thanx in advance
TJ

-- 
Thomas J. Smith @ MCC Software Technology
tsmith@mcc.com  
sally!im4u!milano!tsmith