Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 beta 3/9/83; site xios.UUCP
Path: utzoo!dciem!nrcaer!xios!alexp
From: alexp@xios.UUCP (Alex Pepple)
Newsgroups: net.micro.pc
Subject: Summary -- PC-AT Recommendations Inquiry
Message-ID: <345@xios.UUCP>
Date: Wed, 29-Oct-86 12:00:25 EST
Article-I.D.: xios.345
Posted: Wed Oct 29 12:00:25 1986
Date-Received: Fri, 31-Oct-86 10:51:59 EST
Reply-To: alexp@xios.UUCP (Alex Pepple)
Distribution: na
Organization: Xios Systems Corp., Ottawa, Ont.
Lines: 97

Here is the result of my inquiry on PC-AT recommendations posted on the
net some time ago.

=============
From: mnetor!seismo!ut-sally!utastro!osi3b2!james
To: mnetor!utzoo!dciem!nrcaer!xios!alexp
Subject: Re: PC-AT Recommendations Wanted
In-Reply-To: your article <301@xios.UUCP>

See my article in net.micro.pc on PC's Ltd.  The machine works, but the
company does not.
---
James R. Van Artsdalen    ...!ut-ngp!utastro!osi3b2!james    Live Free or Die

=======================

From: <hplabs!nike!harvard!hscfvax!pavlov>
To: harvard!nike!hplabs!pesnta!nrcaer!xios!alexp
Subject: Re: PC-AT Recommendations Wanted
In-Reply-To: your article <301@xios.UUCP>

 I have purchased a total of 5 PC Designs machines here: 2 FD1000's and 3
 Turbo AT's.  These have been running between 4 and 8 months (earliest to most
 recent purchased) without any problems/failures.  We purchased 2 of the AT
 clones with Atronics EGA+ boards; these worked fine with MS Windows, Paint,
 etc, but failed to display Freelance properly.  PC Designs sent us new PAL and
 ROM chips for the boards which cured the problem.  Overall, the machines have
 worked out well for us, and at a good price.

   greg pavlov, fstrf, amherst, ny

======================


From: Owen Adair <amdcad!gatech!gt-eedsp!owen>
To: xios!alexp
Subject: Re: PC-AT Recommendations Wanted
Newsgroups: net.micro.pc
In-Reply-To: <301@xios.UUCP>
Organization: School of Electrical Engineering, Ga. Tech, Atlanta, GA  30332
Cc: 


Read the October 14, 1986 Issue (Vol 5 no. 17) offf PC magazine.
There is a good review of cheap clones.


-- 
Owen Adair, Digital Signal Processing Lab, Ga. Institute of Technology
uucp ... !{akgua,allegra,hplabs,ihnp4,seismo,ulysses}!gatech!gt-eedsp!owen
Disclaimer: My employer is not responsible for, nor does it care, what I 
	    say here or anywhere else.

====================


From: ihnp4!hsi!tankus (Ed Tankus)
To: utzoo!dciem!nrcaer!xios!alexp
Subject: Re: PC-AT Recommendations Wanted
In-Reply-To: your article <301@xios.UUCP>

Alex,

>From the info I have read and the people I have talked to, I tend to be partial
to the Sperry IT and (new) microIT. However, I do not have any hands-on
experience with either machine (that may change shortly).

I would be VERY interested in any info you have on the TECH PC AT. It looks
like it has a lot of potential based on the ads I have seen but does not have
a color monitor available. I wonder if it supports CGA/EGA? Maybe you can
answer that for me.

Cheers!

-- Ed.

=======================


From: mnetor!seismo!rochester!bullwinkle!uw-beaver!tikal!sigma!willm (William Hodgson)
)

To: mnetor!utzoo!dciem!nrcaer!xios!alexp
Subject: Re: PC-AT Recommendations Wanted
Newsgroups: net.micro.pc
In-Reply-To: <301@xios.UUCP>
Organization: Summation, Kirkland, WA

when it tried to boot, it would hang in RAM check. Powering up
several times would almost get it past this check. We have sent it
back to Wells, but I hear they have some financing problems and may
not be around too much longer. So, be careful in your selection of a
"compatible" product.

Bill (willm) Hodgson