Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!uwvax!puff!plocher
From: plocher@puff.wisc.edu (John Plocher)
Newsgroups: net.micro.pc
Subject: Re: Booting xenix/microport unix from drives other than C:
Message-ID: <304@puff.wisc.edu>
Date: Tue, 4-Nov-86 16:54:27 EST
Article-I.D.: puff.304
Posted: Tue Nov  4 16:54:27 1986
Date-Received: Wed, 5-Nov-86 05:07:29 EST
References: <69@reality1.UUCP>
Reply-To: plocher@puff.WISC.EDU (John Plocher)
Organization: U of Wisconsin CS Dept
Lines: 15
Keywords: PC/AT unix boot

james@reality1.UUCP asks:
>Is it possible to boot Xenix or Microport's unix from a second hard disk?  

NO - Xenix (IBM/uSoft 2.0) can ONLY boot from hard disk 0 (C:)
BUT - The Xenix boot routine allows you to select either the Xenix or the
      DOS partition.  This allows you to segregate your 20 meg drive 0
      into 19.5M for Xenix, and 500K for DOS, which should be enuf to
      put a config.sys and an autoexec.bat to movve you over to D:.
      a judicious SUBST C:=D: then makes DOS think that Drive 1 (which
      really is D:) is C:.
-- 
"Never trust an idea you get sitting down" - Nietzche
------------	{harvard,seismo}!uwvax!uwmacc!uwhsms!plocher        (work)
John Plocher    {harvard,seismo}!uwvax!puff!plocher                 (school)
------------	decvax!encore!vaxine!spark!121!0!John_Plocher       (FidoNet)