Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-spam!sri-unix!hplabs!hpcea!hpfcdc!hpcnoe!hpcnof!thj
From: thj@hpcnof.UUCP (Thomas Hjellming)
Newsgroups: net.micro.pc
Subject: Re: ms-dos int 11
Message-ID: <960008@hpcnof.UUCP>
Date: Tue, 4-Nov-86 17:49:40 EST
Article-I.D.: hpcnof.960008
Posted: Tue Nov  4 17:49:40 1986
Date-Received: Wed, 5-Nov-86 22:30:20 EST
References: <1038@whuts.UUCP>
Organization: HP Colorado Networks Division
Lines: 16


     Try the following from DEBUG/SYMDEB

-a100
-int 11
-<cr>
-g 102      ; assumes that IP=100h!

   Then look at the printed value in the AX register.
This should do it for you.  

Tom Hjellming
Colorado Networks Division
Hewlett-Packard

...!hplabs!hpfcla!hpcnof!thj