Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!cmcl2!rna!rocky2!frank
From: frank@rocky2.UUCP (Ferenc Horvath)
Newsgroups: net.micro.pc
Subject: Re: Can you Copy to COMn: in DOS/ How to ready COMn: in DOS.
Message-ID: <275@rocky2.UUCP>
Date: Wed, 5-Nov-86 12:48:47 EST
Article-I.D.: rocky2.275
Posted: Wed Nov  5 12:48:47 1986
Date-Received: Thu, 6-Nov-86 03:29:12 EST
References: <8826@watarts.UUCP> <762@polaris.UUCP> <118@dosadi.UUCP>
Reply-To: frank@rockefeller.UUCP (Ferenc Horvath)
Organization: Rockefeller Univ.,N.Y.C 10021
Lines: 4

If you want to avoid putting jumpers on the previously mentioned pins,
use the PRINT command with the file name you want to send through the
COM port.  Of course, you'll have to set "mode lpt1:=com1" first.
I have used this to print files on an H/P LaserJet.