Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!andromeda!argus!ken
From: ken@argus.UUCP (Kenneth Ng)
Newsgroups: net.sources.bugs
Subject: Re: Need help with UUCP over X.25
Message-ID: <532@argus.UUCP>
Date: Fri, 17-Oct-86 09:39:55 EDT
Article-I.D.: argus.532
Posted: Fri Oct 17 09:39:55 1986
Date-Received: Fri, 17-Oct-86 22:21:18 EDT
References: <44700004@cdp>
Organization: NJ Inst of Tech., Newark NJ
Lines: 31

In article <44700004@cdp>, scott@cdp.UUCP writes:
> 
> I would like to talk to someone who has an X.25 connection to
> Telenet, runs SysVr2 vanilla UUCP or something close, and has
> people call them via Telenet to run UUCP.  Any pointers on
> running UUCP over Telenet would be appreciated.
> 
> -scott
> 415-322-9060
> {ihnp4,...}!hplabs!cdp!scott

If you get this to work I'd be interested.  About a year ago this
site tried to get uucp to work over a couple Dynapac X.25 pads.
It never worked.  Apparently the problem is that uucp does not
have an option to use only 7 bit data transfer.  It seems that
all the options uucp has are variations of the same single option.
By the way, I never found documentation that says that uucp needs
8 bit transfer, the local Unix guru swears that uucp works 7 bit
however.  Can anyone confirm or deny this?

-- 
Kenneth Ng: Post office: NJIT - CCCC, Newark New Jersey  07102
uucp !ihnp4!allegra!bellcore!argus!ken
     ***   WARNING:  NOT ken@bellcore.uucp ***
     !psuvax1!cmcl2!ciap!andromeda!argus!ken
bitnet(prefered) ken@orion.bitnet

McCoy: "This won't hurt a bit"
Chekov: "That's what you said last time"
McCoy: "Did it?"
Chekov: "Yes"