Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!columbia!rutgers!clyde!cbatt!ihnp4!chinet!magik From: magik@chinet.UUCP (Ben Liberman) Newsgroups: sci.misc Subject: Re: Re: Fluids and solids (was Re: H-less liquids) Message-ID: <703@chinet.UUCP> Date: Fri, 31-Oct-86 03:04:05 EST Article-I.D.: chinet.703 Posted: Fri Oct 31 03:04:05 1986 Date-Received: Mon, 3-Nov-86 19:47:15 EST References: <17@wjh12.HARVARD.EDU> <666@faron.UUCP> <18@wjh12.HARVARD.EDU> <1454@jade.BERKELEY.EDU> <13479@amdcad.UUCP> <754@riccb.UUCP> Sender: news@chinet.UUCP Reply-To: magik@chinet.UUCP (Ben Liberman) Distribution: net Organization: chi-net, Public Access UN*X, Chicago IL Lines: 29 In article <754@riccb.UUCP> jmc@riccb.UUCP (Jeff McQuinn ) writes: >> >> Conversely, there are materials which are called "thixotropic" (spelling?), >> which are solids if stressed slowly and liquids if stressed quickly. A good > >Incidently; Van Nostrum flatly states that glass is a solid. It sometimes >shows properties like those of a super-cooled liquid. > > Jeff McQuinn just VAXing around This is a second hand story - take it as you will! An old trick, used by experienced glaziers on their apprentices was based on the property of glass to micro-fissure when scrached and then "heal" in short order. The glazier, by way of example, would scribe a complex line on a piece of glass and snap it cleanly in two. He would then hand it to the aprentice to scribe and then take it back to examine it while talking at length of the delicate ART of glass cutting. When handed back to the apprentice for snaping, the piece of glass would break anywhere but where it was supposed to. I have also heard that the large store front windows on the downtown Chicago stores (Marshall Fields, etc.) would be removed and rotated every few decades to prevent breakage because the glass would get thicker at the bottom and thinner at the top. From the rumor mill: ---------------------- Ben Liberman ihnp4!chinet!magik or ihnp4!homebru!magik