Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!ut-sally!im4u!milano!paver
From: paver@milano.UUCP
Newsgroups: comp.dcom.modems
Subject: Re: An interesting modem problem
Message-ID: <3048@milano.UUCP>
Date: Mon, 24-Nov-86 14:46:35 EST
Article-I.D.: milano.3048
Posted: Mon Nov 24 14:46:35 1986
Date-Received: Mon, 24-Nov-86 23:59:05 EST
References: <128@gaia.UUCP> <4070001@hpscda.HP.COM> <18@ucdavis.UUCP> <418@catnip.UUCP> <117@devon.UUCP>
Sender: paver@milano.UUCP
Organization: MCC, Austin, Texas
Lines: 21
Keywords: CTS 2424ADA
Summary: MR indicator show DSR state

Quoting from the CTS2424ADA Instruction Manual:

MR		Modem Ready
This LED follows the true state of the Data Set Ready (DSR) RS232
interface signal (pin6).  It is not lighted if pin 6 is forced active
with Switch 2.  The MR LED indicates the Communications State has
been entered and the modem, or data-set as it is sometimes called,
is ready to transmit and receive data.  It does not indicate that the
data link is established.



--

-------------------------------------------------------------
Bob Paver  ---->  paver@mcc.arpa  OR  ut-sally!im4u!milano!paver

Microelectronics and Computer Technology Corp (MCC)
9430 Research Blvd
Austin, Texas 78759
(512) 834-3316