Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-spam!ames!ucbcad!ucbvax!decvax!decwrl!labrea!navajo!rokicki
From: rokicki@navajo.STANFORD.EDU (Tomas Rokicki)
Newsgroups: comp.sys.amiga
Subject: Serial port errors
Message-ID: <1102@navajo.STANFORD.EDU>
Date: Wed, 19-Nov-86 11:26:33 EST
Article-I.D.: navajo.1102
Posted: Wed Nov 19 11:26:33 1986
Date-Received: Thu, 20-Nov-86 08:26:25 EST
Organization: Stanford University
Lines: 26

[ Software Failure.  Press left mouse button to continue. ]
[           Guru Meditation #00000004.00020190            ]

But seriously, folks . . .

After copying yet another file to my serial printer, I got
the following cryptic notation -after the file was completely
finished- on the printer:

rom-wack
PC: 020DD2  SR: 2500  USP: 0223E8  SSP: 07FFC0  XCPT: 0003  TASK: 000000
DR: 00000000 00010800 00000000 00000057 00000000 0001CFC8 00021754 00021754
AR: 00DFF000 00010FC6 00009440 00010560 00FF5118 00020C76 FFFFFFFF
SF: 0002 079A 0001 0E44 0002 1814 0002 0874 0001 CFF8 0002 1814 0001 F71C 00FC

Does anyone read this stuff?

In addition, when I hang the printer off the parallel port and send
gobs of data (which I occasionally do), the Amiga starts to drop bits
on the floor.  I know it's the Amiga because it works fine with the
IBM AT . . .

All of this is using either copy or writing directly to ser: or par:
from C under 1.1.  Any thoughts will be appreciated.

-tom