Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!ames!ucbcad!ucbvax!hplabs!tektronix!tekgen!tekigm!phils
From: phils@tekigm.UUCP (Phil Staub)
Newsgroups: comp.sys.amiga
Subject: Re: C-compilers for Amiga are Terrible (really Manx problem)
Message-ID: <1041@tekigm.UUCP>
Date: Sun, 30-Nov-86 03:26:59 EST
Article-I.D.: tekigm.1041
Posted: Sun Nov 30 03:26:59 1986
Date-Received: Sun, 30-Nov-86 21:55:27 EST
References: <8611191016.AA19776@cory.Berkeley.EDU> <1074@zen.BERKELEY.EDU> <1133@zen.BERKELEY.EDU> <9705@sun.uucp> <3060@garfield.UUCP>
Reply-To: phils@tekigm.UUCP (Phil Staub)
Distribution: net
Organization: Tektronix, Inc., Beaverton, OR.
Lines: 32

In article <3060@garfield.UUCP> john13@garfield.UUCP (John Russell) writes:
>One problem I haven't seen mentioned (although if it is known and there is a
>way around it, I'd like to hear about it!):
>
>Manx printf doesn't like %f!
>

He goes on to describe the problem and what he has tried to do to fix it.
Then:

>The Manx documentation had nothing to say about this, other than that it
>supported full Kernighan & Richie, 

Have you looked at page 6 of the 3.20a release document, (mine is dated 
March 3, 1986. I think thats probably the only one you'll find for 3.20a).

I won't go into detail, but you have to use the m.lib or m32.lib library, 
and it must be searched before the c.lib or c32.lib library, e.g.:

	ln file.o -lm -lc

Hope this helps.

Phil Staub                       P.O. Box 3500
Tektronix, Inc.                  Vancouver, Washington 98668
ISI Engineering                  M/S C1-904, (206) 253-5634
..tektronix!tekigm!phils
-- 
Phil Staub                       P.O. Box 3500
Tektronix, Inc.                  Vancouver, Washington 98668
ISI Engineering                  M/S C1-904, (206) 253-5634
..tektronix!tekigm!phils