Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!mit-eddie!genrad!decvax!ucbvax!sdcsvax!sdcc6!sdcc7!ee162faq
From: ee162faq@sdcc7.ucsd.EDU (Back Here)
Newsgroups: comp.sys.amiga
Subject: Re: Blitter
Message-ID: <838@sdcc7.ucsd.EDU>
Date: Mon, 8-Dec-86 18:27:29 EST
Article-I.D.: sdcc7.838
Posted: Mon Dec  8 18:27:29 1986
Date-Received: Tue, 9-Dec-86 05:06:24 EST
References: <8612071926.AA10666@cory.Berkeley.EDU>
Reply-To: ee162faq@sdcc7.ucsd.edu.UUCP (Back Here)
Organization: U.C. San Diego, Academic Computer Center
Lines: 16


	As stated earlier, I am using BltBitMap, which returns the
	number of planes involved in a blit.  Since I am using a 4
	plane source/dest, apparently I am actually doing 4 blits.
           
	So, back to my original question, using BltBitMap with 4
	planes source/dest, what procedure is neccessary to get the
	desired affect (not altering the higher priority image).
	For example, what colors sets would have to be used where,
	etc. (you stated a general description earlier).

	thanks again for your support.


        John
        7OHN