Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-unix!hplabs!sdcrdcf!burdvax!bpa!cbmvax!carolyn
From: carolyn@cbmvax.cbm.UUCP (Carolyn Scheppner)
Newsgroups: comp.sys.amiga
Subject: Re: Serial port CLI
Message-ID: <990@cbmvax.cbmvax.cbm.UUCP>
Date: Fri, 14-Nov-86 20:18:19 EST
Article-I.D.: cbmvax.990
Posted: Fri Nov 14 20:18:19 1986
Date-Received: Sun, 16-Nov-86 06:28:42 EST
References: <6984@topaz.RUTGERS.EDU>
Reply-To: carolyn@cbmvax.UUCP (Carolyn Scheppner)
Distribution: na
Organization: Commodore Technology, West Chester, PA
Lines: 25
Keywords: need info

In article <6984@topaz.RUTGERS.EDU> giovanne@topaz.RUTGERS.EDU (Giovanne) writes:
>
...
>	A cli process can be opened up to the serial port by typing:
>
>			1>newcli ser:
>
>	But the the buffer is too large, so you have to type a lot of
>returns to get a response to a command. (anoying)
>
>	Does anyone know what would be involved in hacking a bypass
>from the serial buffer, when opening a cli to ser:?
>

   You write your own handler for the serial.device and you Mount it.
I believe Phil Lindsay posted his skeleton handler a while back.

   Or you can buy the Metacomco Toolkit which contains an AUX: handler.

-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Carolyn Scheppner -- CBM   >>Amiga Technical Support<<
                     UUCP  ...{allegra,caip,ihnp4,seismo}!cbmvax!carolyn 
                     PHONE 215-431-9180
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=