Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: utzoo!mnetor!seismo!rutgers!sri-unix!hplabs!decwrl!decvax!tektronix!reed!kamath From: kamath@reed.UUCP (Sean Kamath) Newsgroups: comp.sys.apple Subject: Re: Imagewriter problem... Message-ID: <4596@reed.UUCP> Date: Fri, 14-Nov-86 21:00:22 EST Article-I.D.: reed.4596 Posted: Fri Nov 14 21:00:22 1986 Date-Received: Sun, 16-Nov-86 20:18:43 EST References: <8611121209.AA18707@ucbvax.Berkeley.EDU> Reply-To: kamath@reed.UUCP (Sean Kamath) Organization: Reed College, Portland, OR Lines: 45 In article <8611121209.AA18707@ucbvax.Berkeley.EDU> SJDMK@UNO.BITNET writes: >I'm having trouble with my Imagewriter!!! > >As I'm printing something, every few lines it seems like the paper >advancer gets stuck. > >It makes a "grinding" noise and the paper didn't advance. It continues >printing after this but the printout is then screwed up. > >I've found tonight that if I keep pressure on the manual paper-advance >knob (on the right hand side) in the up-paper direction, the problem >goes away (for the most part). > >Any ideas or suggestions? > > Steven J. Dawson > BITnet: SJDMK@UNO Well, you don't say wehter it's a IW1 or IW2, but I know there are problems with both. I know that the IW2 is currently having problems with it's paper feed, the cure to which is to remove the rear cover. Then just watch out for refeeding of paper. Something similar happenned with the IW1 I think. ________________________________________________________________________________ Sean Kamath UUCP: {masscomp, decvax, allegra, psu-cs, ucbcad, ucbvax, purdue, hplabs, hp-pcd, sequent, uw-beaver, ihnp4, cbosgd, gatech, nsc-pdc}!tektronix!reed!kamath CSNET: reed!kamath@Tektronix.CSNET BITNET: reed!kamath@Berkeley.BITNET ARPA: tektronix!reed!kamath@Berkeley reed!kamath@hplabs DECNET: RHEA::DECWRL::"decvax!tektronix!reed!kamath" US Snail: Box 395 Reed College, Portland, OR 97202 (503) 239-7458 These are not the fastest or best paths, just the easiest to use. I hope they work. (Most notably the US Snail Service :-)