Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!styx!ames!ucbcad!ucbvax!LLL-MFE.ARPA!SECRIST%OAK.SAINET.MFENET
From: SECRIST%OAK.SAINET.MFENET@LLL-MFE.ARPA
Newsgroups: comp.sys.apple
Subject: VT100 emulators
Message-ID: <8611250347.AA23761@ucbvax.Berkeley.EDU>
Date: Mon, 24-Nov-86 19:02:00 EST
Article-I.D.: ucbvax.8611250347.AA23761
Posted: Mon Nov 24 19:02:00 1986
Date-Received: Tue, 25-Nov-86 03:14:39 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 24

From:    <SECRIST%OAK.SAINET.MFENET@LLL-MFE.Arpa>   (Richard C. Secrist)
Date:    Mon, 24-NOV-1986 19:04 EST
To:      INFO-APPLE@BRL.ARPA
Message-ID: <[OAK.SAINET.MFENET].80B09BC0.008F8738.SECRIST>
Header-Disclaimer: I don't like my headers either !
X-VMS-Mail-To: APPLE

I need a GOOD VT-100 emulator for a ][+; //e; //c - PD or 
otherwise - that can:

1) handle a variety of I/O cards (Super Serial, CCS 7710 a must)
2) does not require a slot outside of the communications card itself
3) supports both keypad and terminal-identification sequences

Softterm 2 (Softronics) and PFS:Access (Personal Software) come to
mind; I know of DCOM but never got it to work.

Experiences and references appreciated.  If you send your comments
to me directly I will summarize for the net.

Thanks to all !

Richard
SECRIST%OAK.SAInet.MFEnet@LLL-MFE.Arpa