Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!sri-unix!hplabs!sdcrdcf!ism780c!tim
From: tim@ism780c.UUCP
Newsgroups: comp.sys.att
Subject: Re: 6300+ question
Message-ID: <4687@ism780c.UUCP>
Date: Sun, 23-Nov-86 01:54:06 EST
Article-I.D.: ism780c.4687
Posted: Sun Nov 23 01:54:06 1986
Date-Received: Mon, 24-Nov-86 00:57:07 EST
References: <3908@jhunix.UUCP> <124@uxrd1.UUCP>
Reply-To: tim@ism780c.UUCP (Tim Smith)
Organization: Interactive Systems Corp., Santa Monica, CA
Lines: 17

In article <124@uxrd1.UUCP> thk@uxrd1.UUCP (Tom Kiermaier ) writes:
>
> Another little quirk is that the swapper uses up an VERY large percentage
> of the CPU time. After having my machine on for an hour (and not even
> logged in) the swapper shows around 55 minutes of CPU time. This definitely
> inhibits the performance of the machine.

Perhaps idle time gets charged to the swapper on the 6300+?  If 
so, this is not bad.  An interesting test would be to run an 
infinite computation loop for an hour.  If the swapper still gets 
55 minutes, then there is a problem.  

-- 
emordnilapanalpanama

Tim Smith       USENET: sdcrdcf!ism780c!tim   Compuserve: 72257,3706
                Delphi or GEnie: mnementh