Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!gatech!akgua!codas!mtune!mtuxo!nobi
From: nobi@mtuxo.UUCP (m.juliar)
Newsgroups: comp.sys.ibm.pc
Subject: Re: copy to board
Message-ID: <2269@mtuxo.UUCP>
Date: Mon, 24-Nov-86 09:28:10 EST
Article-I.D.: mtuxo.2269
Posted: Mon Nov 24 09:28:10 1986
Date-Received: Tue, 25-Nov-86 10:18:27 EST
References: <145@lambda.UUCP>
Organization: AT&T Information Systems Labs, Holmdel NJ
Lines: 6

Central Point's Copy Option Board is highly recommended.  It appears
to work on anything except a disk with a laser hole.  (There are
sometimes ways to get around that.)  The board was designed for the
IBM PC, of course, but I have used it only on an AT&T PC 6300.  I
don't know if it works on an Epson machine.  If the Epson is a close
clone, it should work.  Call up Central Point in Oregon and ask them.