Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!styx!ames!ucbcad!ucbvax!decvax!linus!gwr
From: gwr@linus.UUCP (Gordon W. Ross)
Newsgroups: comp.sys.ibm.pc
Subject: Re: STACK in config.sys
Message-ID: <61@linus.UUCP>
Date: Wed, 26-Nov-86 16:11:44 EST
Article-I.D.: linus.61
Posted: Wed Nov 26 16:11:44 1986
Date-Received: Thu, 27-Nov-86 01:55:19 EST
References: <7323@topaz.RUTGERS.EDU>
Reply-To: gwr@linus.UUCP (Gordon W. Ross)
Organization: The MITRE Corporation, Bedford MA
Lines: 14
Keywords: stack,config,msdos

In article <7323@topaz.RUTGERS.EDU> tessler@topaz.RUTGERS.EDU (Ira Tessler) writes:
>Can someone tell me the syntax of the STACK option in the config.sys 
>under dos 3.2?
The CONFIG.SYS option STACKS is documented in appendix B of the
DOS 3.2 manual.  The syntax is:
	STACKS=n,s		where:
n is the number of stacks, range: [8,64], default=9 and
s is the size in bytes of each, range: [32,512], default=128.
	I had trouble finding it too, so I added a cross reference to
appendix B in the section on configuring.
-- 
    Gordon W. Ross              Phone: (617) 271-2199
    The MITRE Corporation       ARPA: linus!gwr@mitre-bedford
    Bedford, MA  01730          uucp: decvax!linus!gwr