Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cuae2!ihnp4!inuxc!pur-ee!uiucdcs!uiucuxc!clio!berger
From: berger@clio.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: AT questions
Message-ID: <16800005@clio>
Date: Wed, 19-Nov-86 15:13:00 EST
Article-I.D.: clio.16800005
Posted: Wed Nov 19 15:13:00 1986
Date-Received: Fri, 28-Nov-86 07:22:42 EST
References: <13210001@acf4.UUCP>
Lines: 5
Nf-ID: #R:acf4.UUCP:13210001:clio:16800005:000:239
Nf-From: clio.Uiuc.ARPA!berger    Nov 19 14:13:00 1986


Some software is (badly) written to depend on software timing
loops.  It will only perform properly if the machine uses the
same clock speed, thus, you may want to be able to run at
6 MHz even if your machine will normally run at 12 MHz.