Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!lll-crg!rutgers!clyde!cbatt!ihnp4!inuxc!iuvax!access
From: access@iuvax.UUCP
Newsgroups: comp.sys.ibm.pc
Subject: Re: Seagate ST225 and WD1002WX-2 questi
Message-ID: <118000001@iuvax>
Date: Wed, 3-Dec-86 21:19:00 EST
Article-I.D.: iuvax.118000001
Posted: Wed Dec  3 21:19:00 1986
Date-Received: Fri, 5-Dec-86 04:52:54 EST
References: <1261@tekigm2.UUCP>
Lines: 10
Nf-ID: #R:tekigm2.UUCP:1261:iuvax:118000001:000:606
Nf-From: iuvax.UUCP!access    Dec  3 21:19:00 1986


It may be a combination of the controller card and the processor chipo
from what I've been told.  Check and see which Rom version your controller
is:  F019 or F022.  The F022 is an autoconfig chip that "MIGHT" have
problems at high speed and or with a non-ibm system.  I was told that by
my distributor when putting the controllers and Seagates into Zenith 158s
with their dual speed 8088-2 chips.  We also had the consideration of
possibly networking and stories that there might be problems because of
that.  Sorry I don't have concrete ideas for you.
Bob    cole@iubacs (bitnet)    access@iuvax (uucp)