Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-unix!hplabs!felix!jim
From: jim@felix.UUCP (Jim Gilbert)
Newsgroups: comp.sys.m68k,comp.sys.apple
Subject: 68008 Apple ][ Co-processor Specs Avail
Message-ID: <1922@felix.UUCP>
Date: Mon, 24-Nov-86 12:00:52 EST
Article-I.D.: felix.1922
Posted: Mon Nov 24 12:00:52 1986
Date-Received: Mon, 24-Nov-86 23:36:45 EST
Reply-To: jim@felix.UUCP (Jim Gilbert)
Organization: FileNet Corp., Costa Mesa, Ca.
Lines: 60
Xref: mnetor comp.sys.m68k:31 comp.sys.apple:90


	Apple ][ 68008 Co-processer Specs

KIT DESCRIPTION:

	Information sufficient to enable daring neophyte or 
	hardware hacker to build a wirewrap Apple ][ co-processor board
	like the prototype which is now running.

		Parts List
		Schematics
		Parts Placement Sketch
		Wire List
		Monitor ROM source 
		Applesoft program source


BOARD FEATURES:

	Not for Apple //c
	Apple ][, ][+, //e, //GS 68008 Co-processor Board
		8 MHZ 68008
		128 KB DRAM at 1 wait state
		8-32KB EPROM with monitor
		Interprocessor communication at memory speed by 2 512x8 FIFOS
		68901 MFP
			interrupt controller
			4 timers
			serial port 
				DTR, RTS, CTS, DSR implemented
				2x13 header for flat cable to DB-25
		Applesoft debugger/loader
			access to 68008
			SLOOOOOOW load from DOS 3.3 text files in Intel
				HEX or Motorola S-record format

TERMS:

	This no-guarantees, support-if-I-don't-get-tired-of-it documentation
	package will be mailed interested parties for cost of reproduction
	and mailing plus $20 for my time (doing repro etc.) rounded up to the 
	nearest $5.  No hardware is offered, only software and information 
	on parts needed to build your own.  

	Right now I am mainly trying to figure out 
		a. if anyone is interested - if not I will probably not
		   bother polishing off my documentation
		b. how many copies to make

	Hardware and software design and rights thereto will remain my property.
	I am NOT placing this in the public domain.  I am willing to
	provide individual experimenters access to this work at 
	nominal cost for now.

	Jim Gilbert			...hplabs!felix!jim

	Disclaimer: The board described by this kit described was built 
	as a personal educational project by me and is not intended to be
	in any way associated with the products of my employer, or any
	other commercial organization.