Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!columbia!rutgers!mit-eddie!husc6!panda!genrad!dpb
From: dpb@genrad.UUCP (Dave P. Bernier)
Newsgroups: comp.sys.mac
Subject: Binhex V4 or Kermit.rsrc binaries needed!
Message-ID: <1129@genrad.UUCP>
Date: Thu, 13-Nov-86 09:42:01 EST
Article-I.D.: genrad.1129
Posted: Thu Nov 13 09:42:01 1986
Date-Received: Thu, 13-Nov-86 21:42:49 EST
Distribution: net
Organization: GenRad, Inc., Concord, Mass.
Lines: 27
Keywords: Binhex Kermit

I am currently trying the get the latest version of Kermit working on one of
our company MAC's. I was working on it for several hours yesterday, trying all
of the different ways suggested by the Kermit manual. I have given up, at
least for a while, because I don't have the correct tools to do the job. Could
some one please E-mail me either the Binaries for the latest Kermit, in a
format that could be understood by BinHex V2, or the binaries for BinHex V4,
also in a format that could be understood by BinHex V2. (In case you haven't
noticed, I only have V2.) Could you also give me fairly detailed instructions
on how to decode/make work the files that you send me, as I am a fairly new at
using the MAC.

						Thanks in Advance,
						David Bernier


Any thoughts, opinions that I have are mine(*) under the copyright laws of the
			United States of America
=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=
       Snail-Mail			      E-Mail
     David Bernier
   300 Baker Avenue			decvax!genrad!dpb
   Concord, MA 01742   			
     Mail Stop #26
=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=
I finally got it all together....Now I've forgotten where the hell I put it.
=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=#=
(*) Copyright 1986 David Bernier, Co-op at Large.