Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!uwvax!gumby!bezanson
From: bezanson@gumby.WISC.EDU (Brian Bezanson)
Newsgroups: comp.sys.mac
Subject: Re: Red Ryder Host and my modem cable to Lisa
Message-ID: <453@gumby.WISC.EDU>
Date: Fri, 14-Nov-86 21:05:45 EST
Article-I.D.: gumby.453
Posted: Fri Nov 14 21:05:45 1986
Date-Received: Sat, 15-Nov-86 05:30:23 EST
References: <144@tiger.Princeton.EDU>
Organization: Manta Software Corporation
Lines: 29
Summary: Proper Pinouts to work with Courier or Promodem [should work with all other 'hayes' compats too]

In article <144@tiger.Princeton.EDU>, zabetia@tiger.Princeton.EDU (Mahboud Zabetian) writes:
> We are trying to set up a Red Ryder Host BBS here.  If any of you could give me
> some tips, I would greatly appreciate it.
 
> Also, the Red Ryder Host application requires that the modem sends a CD if and
> only if there is CD signal.  Well the lisa is getting the CD all the time.  I
> know it is not the modem, so it might be the cable.  Anyody know what the pinout
> on the modem(B?) port is? 

Here are the pinouts for a Lisa from the modem port to a stadard RS-232C modem
connector.

XL    to      Modem
===================
 2     <=>      2
 3     <=>      3
 7     <=>      7
 6     <=>      8

That worked for me, if you want to see a full XL BBS, you can call MacCircles.
It is running off of a Lisa with 2 profiles under MacWorks with RRH.  I ran
my BBS on my XL for 8 months without a problem (except those found with any
RRH system).



-- 
Brian Bezanson {seismo,ihnp4,allegra,topaz,harvard}!uwvax!gumby!bezanson
Manta Software Corp.				  bezanson@gumby.wisc.edu