Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-unix!hplabs!tektronix!uw-beaver!ubc-vision!fornax!chapman
From: chapman@fornax.uucp (John Chapman)
Newsgroups: comp.sys.misc
Subject: Re: Need Free/Cheap GOOD schematic editor and PCB layouter
Message-ID: <157@fornax.uucp>
Date: Sat, 22-Nov-86 23:38:58 EST
Article-I.D.: fornax.157
Posted: Sat Nov 22 23:38:58 1986
Date-Received: Mon, 24-Nov-86 23:24:02 EST
References: <1003@brl-adm.ARPA>
Organization: Computing Science Dept, SFU,  Burnaby, B.C. Canada
Lines: 54

.

I have the source for the pcb layout software posted a year or so ago.
I am including it's README fiel below.  If you want it email me (please
put PCB EDITOR in the subject field).  I will save requests for a week
or so and then if there are a lot I will post the sources otherwise I
will mail them to each requester.

{watmath,ihnp4,uw-beaver}!ubc-vision!sfucmpt!sfulccr!chapman

---------------------------------------------------------------------------


This directory contains the source files to PCB V1.24:

PCB is a PC board editor with integrated routers. It was writen
for a VAX running UNIX V4.1 BSD that has a AED-512 graphic terminal
and a Versatec V-80 electrostatic plotter attached.

The PCB source files are:

	paed.c	patr.c	pcdst.h	pcif.c	pcmdl.c	pdiag.c	pfio.c	pleer2.c
	pleer.c	pleer.h	pmain.c	pmap.c	pmnrt.c	pparm.h	pplow.c	pleer1.c
	pstat.c	psub.c	pwide.c	pwork.c	pplace.c pupdate.c

Other files:

	pcb.mss		A manual for PCB in SCRIBE-format
	pcb.1		Unix manual page
	pcbsdef.CIF	The standart CIF library for PCB
	Makefile	Compilation commands
	displays	Sample display location file
	mosis_pcb.txt	MOSIS documentation on their PC board service
	test.cp		Sample componet file
	test.nl		Sample netlist
	test.ty		Sample type file

The following source file are functions of the CMU library that are
used by PCB. These routines were included with permission from CMU.
<leagal mumble saying that you should be thankful that you may use
 this code and the CMU will get mad if you use it to make money>

	fwantread.c	fwantwrite.c	getbool.c	getfloat.c
	getint.c	getstr.c	openp.c		searchp.c
	wantread.c	wantwrite.c

Please send all bug reports, suggestions and improvements to:

		Andreas.Nowatzyk@cmu-cs-vlsi.arpa
	or	...!seismo!cmu-cs-vlsi!agn

However, I do not promise to do anything about it.

	Have fun  --  Andreas