Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!brl-adm!adm!rbloom@apg-1.arpa
From: rbloom@apg-1.arpa (Robert Bloom AMSTE-TEI 3775)
Newsgroups: comp.sys.misc
Subject: Interrupts on the N* Advantage
Message-ID: <1084@brl-adm.ARPA>
Date: Sun, 23-Nov-86 20:12:10 EST
Article-I.D.: brl-adm.1084
Posted: Sun Nov 23 20:12:10 1986
Date-Received: Tue, 25-Nov-86 20:17:49 EST
Sender: news@brl-adm.ARPA
Lines: 28

Help.

     I find I have to write an interrupt-driven application for 
the NorthStar Advantage.  Unfortunately, I don't know how.  
Specifically, I do know how to enable the interrupts, and write 
the interrupt handler, but actually what happens at interrupt 
time eludes me.

     At the interrupt, the z80 jumps to the interrupt routine.  
Where?  My z80 book says, "the z80 expects an [RST or CALL] 
instruction to be placed on its data buss [by the interrupting 
device]"  how it do dat?  Two people who I asked said "to where 
you program it to" but I have no idea how to do that.

     I have a Advantage technical manual.  It may have the info I 
need but I find it incomprehensible.  (I gather that interrupt 
routines are strongly hardware-dependant.)  And I do understand 
that the Advantage is not very fast, but can't believe a simple 
get-and-put routine with interrupts wouldn't be fast enough for 
4800 baud.

     So, can someone help me out?  I'm trying to store the input 
characters from the SIO card away till they can be processed.  I 
have DTR control on the port but I haven't been able to get that 
to work.  (I'm trying to write a very simple high-speed commo 
program.)  I really need a low-level example.

bob bloom