Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!clyde!cuae2!ihnp4!chinet!wmf
From: wmf@chinet.UUCP (William M. Fischer)
Newsgroups: comp.sys.tandy
Subject: Re: Model 16 memory
Message-ID: <855@chinet.UUCP>
Date: Sat, 6-Dec-86 16:27:16 EST
Article-I.D.: chinet.855
Posted: Sat Dec  6 16:27:16 1986
Date-Received: Sun, 7-Dec-86 07:09:18 EST
References: <791@stb.UUCP>
Reply-To: wmf@chinet.UUCP (William M. Fischer)
Organization: chi-net, Public Access UN*X, Chicago IL
Lines: 12

In article <791@stb.UUCP> michael@stb.UUCP writes:
>Summary: Can I upgrade by plugging in 256K chips?
>
>Can a model 16 be upgraded by plugging in 256K chips? If not, is there
Depending upon when your Model 6000 was made, up to either 768k or 1 meg
of RAM can be had by just filling in the empty slots on the memory board(s).

-- 
             ====================================================  
             |    Fortiter in re,       ||     Bill Fischer     |
             |       suaviter in modo.  ||  ...ihnp4!chinet!wmf |
             ====================================================