Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 beta 3/9/83; site utecfa.UUCP
Path: utzoo!utcsri!uthub!utecfa!larry
From: larry@utecfa.UUCP (Larry Philps)
Newsgroups: comp.text
Subject: Re: Imagen 12/300 OPC belt problems?
Message-ID: <1937@utecfa.UUCP>
Date: Wed, 26-Nov-86 13:27:24 EST
Article-I.D.: utecfa.1937
Posted: Wed Nov 26 13:27:24 1986
Date-Received: Wed, 26-Nov-86 17:28:19 EST
References: <137@uhmanoa.UUCP>
Organization: Engineering Computing Facility, University of Toronto
Lines: 22

We have had an Imagen 12/300 here since August 1985 and have run
about 50,000 copies through it.  I agree that the OPC belts are
very sensitive, but ours have been holding up fine - needing only
to be replaced about every 10,000 copies.

We only destroyed a belt once, and that was right after we got the machine.
It turns out that if you have a paper jam and just pull the paper out
of the machine, you can often scratch the belt.  Our service people
told us that before clearing a paper jam you should remove the drawer
that holds the OPC belt.  You can then drag the jammed paper out of the
machine without damaging anything.

Hope this is useful information.


-- 
Larry Philps
Engineering Computing Facility
University of Toronto
Usenet:     {linus, ihnp4, allegra, decvax, floyd}!utcsri!utecfa!larry
CSNET:      larry@Toronto
ARPA:       larry%Toronto@CSNet-Relay