Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!esosun!net1!sdcsvax!ucbvax!XEROX.COM!Gooding.WBST
From: Gooding.WBST@XEROX.COM
Newsgroups: mod.computers.vax
Subject: Re: Wollongong sw. breakdown with VMS 4.4?
Message-ID: <861111-091246-2235@Xerox>
Date: Tue, 11-Nov-86 12:12:13 EST
Article-I.D.: Xerox.861111-091246-2235
Posted: Tue Nov 11 12:12:13 1986
Date-Received: Wed, 12-Nov-86 21:37:06 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Reply-To: Gooding.WBST@Xerox.COM
Organization: The ARPA Internet
Lines: 14
Approved: info-vax@sri-kl.arpa

I am running a number of non-802.3 standard Ethernet based communication 
software packages on a 750 with a DEUNA.  Upon upgrade from VMS 4.2 to 
VMS 4.4 some of them stopped working, most reporting timeouts.  It seems 
that the 4.4 DEUNA driver may not recognize (read discards) non-802.3 
packets.  By using the 4.2 driver under VMS 4.4 (instead of the 4.4 driver) all 
was made well again in netland.  I suggest you try same.  

Steve <Gooding.Wbst@Xerox.COM>
Xerox Corporation
Webster, NY, USA  14580

Disclaimer: The views expressed herein do not necessarily represent those of 
my employer.  No warranty is implied or expressed concerning this suggested 
solution.