Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!sri-unix!hplabs!sdcrdcf!burdvax!psuvax1!psuvm.bitnet!gms
From: GMS@PSUVM.BITNET
Newsgroups: comp.dcom.modems
Subject: Re: 2400 baud modems
Message-ID: <9701GMS@PSUVM>
Date: Sun, 18-Jan-87 18:27:49 EST
Article-I.D.: PSUVM.9701GMS
Posted: Sun Jan 18 18:27:49 1987
Date-Received: Tue, 20-Jan-87 20:13:38 EST
Expires: Mon, 2-Feb-87 00:00:00 EST
References: <122@osupyr.UUCP> 389@csustan.UUCP
Lines: 26


I have been using the US Robotics Courier 2400 for about 6 months now.  I
use it daily, for up to 5 hours at a shot, on local lines and it works like
a charm. On long-distance lines I have had some problems getting a clean
line for 2400 baud, but at 1200 baud it works great.  The led's are nice, the
duplication of a pocket command book on the underside of the modem is
a plus.  Also it is light and easy to carry when I have to travel. The phone
plug is good for vice/data comm when you have to go through a motel
switchboard.  Basically I've been satisfied.


NOTE --> This represents my personal/professional view and is in no way
         an endorsement of any product by my employer!

-------------------------------------------------------------------------------
 Gerry Santoro                                        ******  *
 Microcomputer Information & Support Center        **********    *
 Penn State University                           ******   ****     *
 101 Computer Building                         ********   ****       *
 University Park, PA  16802                   ***************         *
 (814) 863-4356                               ************            *
                                              *********               *
                                               *******     **        *
 GMS @ PSUVM  (bitnet)                           *****     **      *
 ...!psuvax1!psuvm.bitnet!gms   (uucp)             ****          *
 gms%psuvm.bitnet@wscvm.arpa    (arpa)                *********