Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbatt!ihnp4!alberta!sask!skatter!kuo
From: kuo@skatter.UUCP
Newsgroups: comp.mail.misc
Subject: Re: Can I send mail to a BITNET site?
Message-ID: <289@skatter.UUCP>
Date: Fri, 6-Feb-87 18:32:26 EST
Article-I.D.: skatter.289
Posted: Fri Feb  6 18:32:26 1987
Date-Received: Wed, 11-Feb-87 18:37:49 EST
References: <615@cdx39.UUCP> <274@skatter.UUCP> <1987Jan31.133552.18662@utcs.uucp>
Organization: Accelerator Lab, Saskatoon, Sask.
Lines: 20

In article <1987Jan31.133552.18662@utcs.uucp>, scott@utcs.UUCP writes:
> In article <274@skatter.UUCP> kuo@skatter.UUCP writes:
> >In article <615@cdx39.UUCP>, jc@cdx39.UUCP (John Chambers) writes:
> 
> the gateway from uucp to bitnet is at psuvax1
> 
> >	Don't think you need to make use of APRAnets.
>  
> You would be if you used the gateway at wiscvm (wiscvm.wisc.edu)
> thats the arpa-bitnet gateway.

You may be right, but I have used my path (ie without specifying the
psuvax1 gateway) and it works! I guess the system is smart enough to
figure which gateway it should use (8-)).



... Peter/

uucp: {ihnp4, alberta}!sask!skatter!kuo