Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!mnetor!seismo!rutgers!ames!cit-vax!amdahl!bnrmtv!perkins
From: perkins@bnrmtv.UUCP (Henry Perkins)
Newsgroups: comp.sources.d
Subject: Re: Z80 -> 8080 converter
Message-ID: <1336@bnrmtv.UUCP>
Date: Thu, 15-Jan-87 14:54:05 EST
Article-I.D.: bnrmtv.1336
Posted: Thu Jan 15 14:54:05 1987
Date-Received: Sat, 17-Jan-87 00:15:26 EST
References: <249@rocksanne.UUCP> <175@herman.UUCP>
Organization: Bell Northern Research, Mtn. View, CA
Lines: 14

> I believe that z80 has a mere two instructions that 8080 doesn't have.
> Therefore, most likely, your z80 program will run unchanged with the 8080
> assembler (I hope i'm right in this).  (As long as the z80 code doesn't use
> those two instructions that is)

Sorry, you're thinking of the 8085, not the Z80.  (The two extra
instructions are RIM and SIM.)  The Z80 instruction set is rather
more complex than that for the 8080 (but it doesn't include RIM
or SIM).
-- 
{hplabs,amdahl,3comvax}!bnrmtv!perkins        --Henry Perkins

It is better never to have been born.  But who among us has such luck?
One in a million, perhaps.