Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!ames!ucbcad!ucbvax!BCVAX3.BITNET!BRESNAHA
From: BRESNAHA@BCVAX3.BITNET.UUCP
Newsgroups: comp.sys.apple
Subject: ATTEN: Jim Hayes, DCOM Users.
Message-ID: <8701262356.aa15428@SPARK.BRL.ARPA>
Date: Mon, 26-Jan-87 00:02:00 EST
Article-I.D.: SPARK.8701262356.aa15428
Posted: Mon Jan 26 00:02:00 1987
Date-Received: Wed, 28-Jan-87 06:58:16 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 18


I have run into a few problems with DCOM 3.3, and wanted to know if
anyone has encountered, or better yet solved these problems.
First, the dump to printer function using open-apple P, doesn't
work correctly with my ML-92 and Grappler+.  The problem appears to be
that no linefeeds are sent to my printer.  Anyone know of a slight
fix for this?
Second:  when using full screen editing in EDT, I run into problems
with screen garbage.  This only happens when I use the arrows and the
open apple keys.  Is it my AE Ramworks card, my modem, or a bug??
This is the most anoying problem.  I get the best results if I hit
the arrow key very slowly.  Anyone encounter this problem?

I used the beta test version, and never encountered this problem.  I
hope it is in the software, and hence can be easily (I hope) fixed.
Please post all replies on the net.

--Scott Bresnahan