Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!husc6!uwvax!puff!schumann
From: schumann@puff.UUCP
Newsgroups: comp.sys.apple
Subject: Re: Quadram Parallel Card
Message-ID: <443@puff.WISC.EDU>
Date: Fri, 30-Jan-87 14:35:33 EST
Article-I.D.: puff.443
Posted: Fri Jan 30 14:35:33 1987
Date-Received: Sat, 31-Jan-87 07:40:16 EST
References: <8701291204.AA10659@ucbvax.Berkeley.EDU>
Organization: U of Wisconsin CS Dept
Lines: 12

In article <8701291204.AA10659@ucbvax.Berkeley.EDU>, shell@NADC.ARPA writes:
>     I have a Franklin 1200 (Apple ][+ clone) with a Quadram parallel
> infertace card plugged into a Quadram Quadjet printer.  If I do a PR#1
> (the card is in slot 1) I get about 50 lines of a strange character
> accross the paper.  This only happens the first time I PR#1 after a
> power up.
> 	Steve Shelikoff
> 	(arpa = shell@nadc)
I had a similar problem.  It went away if I went PR#1 fisrt,
and then turned the printer on, then as long as I don't turn off my
Apple, or press OA-ctrl-reset, it works fine.
Chris Schumann		schumann@puff.wisc.edu