Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!husc6!seismo!rochester!ritcv!crd9852
From: crd9852@ritcv.UUCP
Newsgroups: comp.sys.atari.8bit
Subject: Re: Terminal Program, General Help
Message-ID: <83@ritcv.UUCP>
Date: Mon, 9-Feb-87 16:12:32 EST
Article-I.D.: ritcv.83
Posted: Mon Feb  9 16:12:32 1987
Date-Received: Tue, 10-Feb-87 05:49:18 EST
References: <8702070311.AA04891@mitre-bedford.ARPA> <9042@topaz.RUTGERS.EDU>
Reply-To: crd9852@ritcv.UUCP (Charles R. Dennett)
Organization: Rochester Institute of Technology, Rochester, NY
Lines: 11

In article <9042@topaz.RUTGERS.EDU> appelbau@topaz.RUTGERS.EDU (Marc L. Appelbaum) writes:
> Chameleon DOES NOT emulate a VT100, it emulates a VT-52 as well as
>others including:ADM-3A, IBM 3101.

If you do chose to use Chameleon, I suggest you set its parity to off.  I 
had trouble having it emulate a VT-52 until I did this.  It was suggested
by someone on this net.  Sorry, but I forget the person's name.  I use
Chameleon from home.  It's a lot easier on the eyes than another emulator
I have that uses one of the graphic modes to squeeze 80 columns on the screen.
Maybe it would look OK with a monochrome monitor.  It sure is bad on a
color monitor.