Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!utgpu!water!watnot!watmath!clyde!rutgers!sri-unix!sri-spam!ames!ucbcad!ucbvax!MITRE-GATEWAY.ARPA!lazear
From: lazear@MITRE-GATEWAY.ARPA.UUCP
Newsgroups: comp.sys.atari.8bit
Subject: Chameleon and Hayes
Message-ID: <8702120249.AA14385@gateway.mitre.org>
Date: Wed, 11-Feb-87 21:49:01 EST
Article-I.D.: gateway.8702120249.AA14385
Posted: Wed Feb 11 21:49:01 1987
Date-Received: Fri, 13-Feb-87 00:06:13 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 14

Help!  I have a Ventel 1200-31 Hayes compatible model hooked
to my 800 (not XL) via an 850 interface.  I can dial from the
terminal mode screen directly, by giving AT commands from the
keyboard.  My problem is that the Chameleon dialing menu doesn't
seem to work properly.  I can see something being sent to the modem
(and echoed back depnding on switch settings).  But no further
interaction (no off-hook noises or LED) to denote progress.

Does anyone have this setup, or could you tell me the proper settings
of the Hayes modem (Either physical switches for echo, result codes, verbose
mode, etc) or for the Snn software switches to make this work?
Thanks in advance.

	Walt