Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbatt!ihnp4!houxm!homxc!jdn
From: jdn@homxc.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: HELP -- Handshaking on 520ST serial ports
Message-ID: <1885@homxc.UUCP>
Date: Tue, 27-Jan-87 10:50:31 EST
Article-I.D.: homxc.1885
Posted: Tue Jan 27 10:50:31 1987
Date-Received: Wed, 28-Jan-87 22:57:31 EST
References: <2453@well.UUCP>
Organization: AT&T Bell Laboratories, Holmdel
Lines: 16

In article <2453@well.UUCP>, espen@well.UUCP (Peter Espen) writes:
> 
> 	I am trying to set up communications between a stand alone
> 68000 contlled board with standard RS232 serial ports and my 520ST.
> I have everything setup and communicating, however I need to be able to 
> hold off the stand-alone board via hardware/DTR hardware handshaking andf
> apparently the atari 520ST only supports XON/XOFF software handshaking
> on the serial ports. 

I think you should have no trouble supporting hardware handshaking.
Take a look at the Rsconf() call. 

		

			Jonathan Nagy
			{ihnp4|harvard|allegra|seismo}!homxc!jdn