Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!seismo!mcvax!cernvax!jmg
From: jmg@cernvax.UUCP
Newsgroups: comp.sys.atari.st
Subject: Re: autodisk, flexcopy
Message-ID: <429@cernvax.UUCP>
Date: Tue, 27-Jan-87 02:57:05 EST
Article-I.D.: cernvax.429
Posted: Tue Jan 27 02:57:05 1987
Date-Received: Wed, 28-Jan-87 23:07:48 EST
References: <428@cernvax.UUCP> <2122@batcomputer.tn.cornell.edu>
Reply-To: jmg@cernvax.UUCP ()
Distribution: world
Organization: CERN European Laboratory for Particle Physics, CH-1211 Geneva, Switzerland
Lines: 19

In article <2122@batcomputer.tn.cornell.edu> braner@batcomputer.UUCP (braner) writes:
>[]
>
>'Autodisk' writes directly into high RAM, and will work with the 'eternal'
>RAMdisk (and the original version by John Harris) ONLY.  It also assumes
>the RAMdisk is labeled 'D'.  For other cases use 'Flexcopy', which writes
>through Rwabs() and so should work with other 'disks'.  (If you have a
>hard disk you probably don't call your RAMdisk 'D', but then you don't
>need Autocopy either...)

I tried it with disk E (maybe one day I will have a hard disk!) and it
seems to work just fine. I had to modify zzzap though, because it did
reference disk D, and at the same time I made zzzap runnable from auto
and removing the .acc files also).

What I would also like would be
1. the time-setting part of autodisk, for boot disks where I do not
   want a ramdisk.
2. the disk copy part of autodisk, for when I have a battery-backed clock.