Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!rutgers!seismo!mcvax!cernvax!jmg
From: jmg@cernvax.UUCP
Newsgroups: comp.sys.atari.st
Subject: adjusting monochrome screen
Message-ID: <426@cernvax.UUCP>
Date: Fri, 16-Jan-87 05:02:55 EST
Article-I.D.: cernvax.426
Posted: Fri Jan 16 05:02:55 1987
Date-Received: Sun, 18-Jan-87 00:22:03 EST
Reply-To: jmg@cernvax.UUCP ()
Distribution: world
Organization: CERN European Laboratory for Particle Physics, CH-1211 Geneva, Switzerland
Lines: 13

I have got a couple of 520s with Ethernet and telnet (more details at
some future date). One of the monochrome monitors must have got knocked
in transit, because the screen was skew and the right hand side has a
bright line down the right hand edge, apparently because the horizontal
scan cutoff is incorrect (I am NOT at all technically minded!). The
other is OK. Both are the new style (SM125 I think).
I have managed to get the screen straight, but have no idea what to
touch for the problem of the right hand edge. I did look at the
instructions (posted months ago) to adjust the screen, but they were
for the old model (this is entirely different inside: the pots are all
in different places and there is gunge on the magnets etc.).

Does anyone know if this can be adjusted by controls inside the monitor?